Phoenix Star Recylcer Ash Catcher With Inline Perc

Its key parts—a recycler, an inline perc, and borosilicate glass—are picked for great performance and a long life.

• The inline perc is designed for maximum smoke diffusion.
• The recycler path provides a final cooling stage and splash protection.
• Available in common 14mm and 18mm sizes for wide compatibility.

Picking the right size and angle is the most important step to make sure this ash catcher works perfectly with your piece. A bad fit can make it unstable or create a poor seal.

Do I Need A 14Mm Or 18Mm Joint?

Most water pipes use either a 14mm or 18mm joint. An easy way to check is with a dime; a 14mm joint is a bit wider than a dime is thick, while an 18mm joint is much larger. This ash catcher's male joint fits into your water pipe's female joint. Make sure you order the size that matches your piece.

Should I Choose A 45 Or 90 Degree Angle?

The angle makes sure the ash catcher sits upright. As a general rule, choose the 45-degree option for beaker bongs or pieces with an angled downstem joint. Pick the 90-degree option for straight tube bongs or rigs where the joint is perfectly vertical.

Select your size and angle carefully: 45° for beakers and 90° for straight tubes is the standard rule.

• A 45-degree angle is made for water pipes with angled joints, like most beakers.
• A 90-degree angle fits pieces with a vertical joint, which is common on straight tubes.
• Matching the joint size (14mm or 18mm) is key for a stable, airtight connection.

How Does The Inline Perc Create Smoother Hits?

The inline percolator is a simple but very effective diffusion system. When smoke is pulled through the ash catcher, it's forced through dozens of small slits in the horizontal tube. This breaks one large smoke stream into hundreds of tiny bubbles, greatly increasing the surface area that touches the water. The result is fast cooling and filtration, which removes harshness for a smoother inhale.

How Does The Recycler Function Keep My Piece Clean?

After going through the perc, the smoke and water travel up into an outer chamber before "recycling" back down. This looping action does two things: it gives the smoke a longer path for cooling, and more importantly, it works as a natural splash guard. Any water that goes up is sent back to the base, making sure no dirty water ever reaches your mouth or your main bong.

The combination of an inline perc and recycler offers advanced diffusion and splash-free performance.

• The inline perc's slits diffuse smoke for a smoother draw.
• The recycler's water loop cools vapor and is a highly effective splash guard.
• This dual system traps ash and cools smoke before it enters your main rig.

While other percs have good diffusion, this model's recycler adds a unique splash-proof cooling function.

• It combines an inline perc with a recycler for a two-stage process.
• Dry catchers are simpler but don't condition the smoke.
• Showerhead and tree percs offer different diffusion styles but don't have a recycling path.

What Is The Best Way To Clean A Recycler Ash Catcher?

Cleaning this piece is simple. First, empty any old water. Make a cleaning solution with isopropyl alcohol (91% or higher) and coarse salt. Pour the solution into the ash catcher, plug the openings with your fingers or plugs, and shake it hard for 1-2 minutes. The salt will act as a soft scrub to remove resin. Rinse it completely with warm water until all alcohol is gone, then let it air dry.

How Much Water Should I Put In It?

Fill the ash catcher with just enough water to cover the slits on the inline percolator. Too much water can cause drag or stop the recycler from working right. A quick test pull without a bowl will show you if it's working correctly and if water is recycling smoothly without splashing up the joint.

Proper cleaning and water levels are key to this ash catcher's performance and long life.

• Use isopropyl alcohol and coarse salt for effective resin removal.
• Only fill with enough water to cover the inline perc's slits.
• Rinsing it regularly prevents clogs and keeps the flavor fresh.

Follow these simple steps for a perfect session every time.

Setup And Use In 6 Steps

1. Check Fit: Gently connect the ash catcher to your bong to ensure a snug fit.
2. Add Water: Fill the ash catcher with water, making sure the inline perc slits are covered.
3. Test Draw: Take a gentle pull without a bowl to check the water function.
4. Attach Bowl: Place your packed bowl into the top joint of the ash catcher.
5. Enjoy: Use your piece as you normally would, now with extra filtration.
6. Quick Rinse: After your session, rinse the ash catcher with warm water to prevent buildup.

A quick setup process ensures you get immediate benefits from better filtration and a cleaner piece.

• Check the fit and water level before every use for the best results.
• A rinse after your session makes deep cleaning easier later.
• This routine ensures consistent performance and function.

While the Phoenix Star Recycler is an excellent choice for smoothness and cleanliness, it's just one of many styles out there. If you're looking for different types of diffusion or a simpler design, check out our complete collection.

• Shop the full Ash Catchers collection