Phoenix Star Perclrss Ash Catcher

What Are The Specs Of The Phoenix Star Ash Catcher?

Knowing the specifications is the first step to making sure this ash catcher works with your water pipe. It's made from strong borosilicate glass and designed with common sizes to fit a wide range of bongs.

These specs point to a durable, compatible, and high-airflow design that is easy to add to your setup.

• Made from sturdy borosilicate glass.
• Available in the two most common joint sizes: 14mm and 18mm.
• Offered in 45° and 90° angles to match your bong's joint.
• The percless design focuses on easy cleaning and low drag.

Choosing the right size and angle is the most important step. A mismatch can make your setup unstable or prevent a fit. Use this guide to find the perfect match for your water pipe.

How Do I Choose The Right Joint Size (14mm Vs 18mm)?

The joint size of your ash catcher must match your bong's joint. The two most common sizes are 14mm and 18mm. An easy way to check is with a dime. If a dime fits about halfway into your bong's joint, you likely have a 14mm joint. If it falls or fits almost all the way inside, you have an 18mm joint. If you are unsure, always measure your bong's joint or your current bowl slide.

Which Angle Is Correct For My Bong (45° Vs 90°)?

The angle makes sure the ash catcher sits upright and is stable. Look at the joint on your water pipe:

• Choose 90° if: Your bong's joint points straight up. This is common on straight-tube bongs or rigs with a vertical stemless joint.
• Choose 45° if: Your bong's joint comes out at a diagonal angle. This is standard for most beaker bongs, where the downstem slants into the base.

Match the size and angle to your bong's joint for a secure and working setup.

• Use the dime test to figure out if your joint is 14mm or 18mm.
• Pick a 90° ash catcher for vertical bong joints (straight tubes).
• Pick a 45° ash catcher for angled bong joints (beaker bongs).
• A correct fit prevents tipping and ensures it works right.

Why Does A Percless Design Improve Airflow?

Airflow follows the path of least resistance. Percolators add obstacles like slits and holes that create bubbles but also add drag. A percless ash catcher removes these completely. The open chamber lets air pass through freely. This keeps the exact pull and function of your bong's own percolator without getting in the way, resulting in an easy draw.

Is A Percless Ash Catcher Easier To Clean?

Yes, much easier. The simple, hollow design has no complex parts for resin to get stuck in. A quick rinse with hot water is often enough for daily upkeep. For a deep clean, a simple shake with isopropyl alcohol and salt can make it look new in seconds. There are no tiny holes to scrub, making it one of the easiest accessories to own.

The percless design gives you great airflow and is simple to maintain.

• No internal percolator means zero added drag or resistance.
• Maintains the original feel and pull of your water pipe.
• The simple, open chamber allows for effortless cleaning.
• Perfect for flavor-focused users who dislike a restricted draw.

Should I Use This Ash Catcher Dry Or With Water?

This ash catcher can be used either way, but it works best as a dry ash catcher. Using it dry gives you the biggest benefits: catching ash with zero added drag or water filtration. This keeps the flavor pure and makes cleaning as simple as dumping the ash. You can add a little water to trap more resin, but running it dry is the most common and effective way to use a percless design.

For the best results, use it dry to maintain pure flavor and airflow.

• Running it dry catches ash with zero effect on flavor or drag.
• A small amount of water can be added for extra filtration.
• Maintains a clean and ash-free experience in the main bong.
• Simplifies cleanup to a quick dump-and-rinse routine.

How Does It Compare To Other Ash Catchers?

The Phoenix Star Percless model is special because of its simplicity and focus on airflow. Percolated ash catchers add more diffusion, but they also increase drag and are harder to clean. This model is for the person who wants to keep their setup simple and their main piece clean without changing how it performs.

This is the right choice for improving cleanliness without affecting your bong's original function.

• Simpler and easier to clean than percolator ash catchers.
• Provides better airflow compared to multi-chambered models.
• Designed for flower, unlike reclaim catchers for concentrates.
• A low-cost way to reduce how often you clean your bong.

What Is The Best Way To Clean A Percless Ash Catcher?

Cleaning this accessory is fast and simple because of its open design. Follow this 6-step routine to keep it looking new. For best results, we recommend using a cleaning solution made for glass.

1. Empty: Carefully take the ash catcher off and dump any loose ash or old water.
2. Rinse: Rinse the inside with warm water to remove loose bits.
3. Add Cleaner: Pour in a small amount of isopropyl alcohol (91% or higher) and coarse salt.
4. Shake: Cover the openings with your hands or plugs and shake hard for 30-60 seconds.
5. Rinse Again: Pour out the solution and rinse well with hot water until all the alcohol and salt are gone.
6. Dry: Let it air dry all the way before putting it back on your bong.

Regular cleaning takes less than two minutes and helps ensure pure flavor every time.

• The open chamber design makes cleaning quick and easy.
• A simple shake with ISO and salt removes most residue.
• There are no tricky parts where resin and debris can get stuck.
• Find dedicated Glass Cleaning Supplies for tougher jobs.

What Should I Check Before Using This Ash Catcher?

Before you add this to your setup, go through this quick fit checklist. It helps make sure you have the right model and a stable connection. This prevents accidents and ensures you get the best performance from day one.

• Joint Size Match: Confirm your bong's joint is 14mm or 18mm and matches the catcher.
• Angle Match: Check that you have a 45° for a beaker or 90° for a straight tube.
• Gender Fit: Ensure the ash catcher's male joint fits your bong's female joint.
• Stable Connection: Check for a snug, wobble-free fit once connected.
• Clearance Check: Make sure the ash catcher doesn't make your setup top-heavy or unstable.
• Bowl Fit: Confirm your bowl slide fits securely into the top of the ash catcher.

What Are The Long-Term Benefits Of Using It?

Using an ash catcher all the time has several long-term benefits. The biggest one is a much cleaner main piece, cutting down on tough, resin-caked deep cleans. This also helps keep the pure taste of your flower by preventing your bong water from getting dirty too quickly. Over time, it's a simple investment that saves you time and improves every session.

Using this ash catcher leads to less cleaning, better taste, and a more enjoyable routine.

• Dramatically reduces how often you need to clean your bong.
• Keeps your bong water cleaner for longer periods.
• Preserves the pure flavor of your materials session after session.
• Protects your investment by adding a barrier against debris.

Fine-tuning your smoking setup is part of the fun. Whether you are looking for a new bong to pair with your ash catcher, need more cleaning supplies, or want to browse other styles, we have you covered.

• Shop the full collection of Ash Catchers.
• Find the perfect partner for your piece in our Bongs & Water Pipes section.
• Stock up on Glass Cleaning Supplies to keep your gear looking like new.