Milkyway Space Odyssey Wet Ash Catcher

What Specs Matter For A Cleaner Session?

Understanding the parts of the Space Odyssey ash catcher shows how it directly benefits your daily use. Each feature is chosen to improve durability, filtration, and ease of use.

Selecting the right size and angle is the most important step to ensure this ash catcher works with your water pipe. This quick guide makes it simple.

Fitment Checklist:

1. Check Your Bong's Joint: Is it 14mm or 18mm?
2. Identify the Angle: Is the joint angled (like on a beaker) or straight up (like a tube)?
3. Match the Joint Gender: This ash catcher has a male joint, so your bong must have a female joint.
4. Confirm Selection: Use the guides below to pick the matching size and angle.

Do I Need A 45 Or 90 Degree Angle?

The angle of your bong's joint determines which version you need. Using the wrong angle will cause the ash catcher to tilt improperly, which can lead to spills or an unstable setup.

• Choose 45°: This is the standard for most beaker-style bongs or pipes with a joint that emerges at a diagonal angle. The 45° ash catcher will orient itself straight up and down when connected.
• Choose 90°: This is designed for straight-tube bongs or rigs where the joint is perpendicular to the base, pointing straight up. A 90° ash catcher ensures your bowl remains level.

Should I Get A 14Mm Or 18Mm Joint?

The joint size refers to the diameter of the glass connection. You must match the ash catcher's joint size to your bong's joint size for a proper seal. A dime can help you estimate.

• Choose 14mm: This is the most common size. A 14mm joint is slightly wider than the tip of a pinky finger. If a dime sits on top of the opening without falling in, it is likely a 14mm joint.
• Choose 18mm: This larger size offers more airflow. An 18mm joint is noticeably wider, and the edge of a dime will slip partly inside.

Matching your bong's joint size and angle is essential for a stable, airtight connection and proper function.

• A 45-degree ash catcher is typically for beaker-style bongs.
• A 90-degree ash catcher is for straight tubes with vertical joints.
• 14mm is the most common joint size in water pipes.
• Match the size and angle to your piece to prevent tilting and spills.

How Does Wet Filtration Improve Sessions?

A wet ash catcher uses a small amount of water to provide two key benefits. First, it acts as a trap. When ash is pulled through the bowl, it hits the water and is immediately extinguished and captured, preventing it from dirtying your main piece. Second, the water provides an initial stage of cooling and diffusion. This pre-filtered smoke is smoother and less harsh by the time it reaches the primary chamber, delivering a more comfortable experience.

What Makes The Space Odyssey Design Unique?

The Space Odyssey collection by Milkyway Glass is known for its detailed, cosmic-themed artwork. Unlike simple decals, this ash catcher features a sandblasted design that is frosted directly into the glass surface. This technique creates a permanent, textured finish that won't peel or fade over time. The intricate patterns of planets, stars, and celestial bodies make this a functional piece of art that enhances the look of any setup.

The combination of effective wet filtration and a durable, artistic design makes this a standout accessory.

• Wet filtration cools smoke and traps ash effectively.
• This results in a cleaner bong and a smoother draw.
• The Space Odyssey design is sandblasted for a permanent finish.
• This piece combines high-end function with detailed artistry.

How Much Water Should I Add To The Ash Catcher?

Proper setup is quick and easy. Using the right amount of water is key to preventing splashback while ensuring effective filtration. Follow these simple steps for a perfect session every time.

1. Rinse First: Give the ash catcher a quick rinse with fresh water before its first use.
2. Add Water: Carefully fill the ash catcher with enough water to just cover the openings of the internal downstem or percolator. Do not overfill.
3. Attach to Bong: Gently insert the ash catcher's male joint into your water pipe's female joint. Ensure it's snug and secure.
4. Add Bowl: Place your packed bowl into the top joint of the ash catcher.
5. Test the Draw: Take a light pull without lighting the bowl. If water splashes into your mouth or the bong, remove a small amount of water from the ash catcher and try again.

Adding just enough water to cover the perc slits ensures optimal filtration without any unwanted splashback.

• Fill with water just enough to submerge the percolator slits.
• Overfilling can lead to water splashing into the main pipe.
• Always test the draw before lighting to check the water level.
• A secure, airtight connection is crucial for proper function.

How Does It Compare To Other Ash Catchers?

While the Space Odyssey ash catcher offers a unique design, other options focus on different features like material or simplicity. Here is how it compares to other popular choices in the same price range. For budget-friendly diffusion, see the Honeycomb Ash Catcher.

What Is The Best Way To Clean This Ash Catcher?

Keeping your Space Odyssey ash catcher clean is simple and ensures it functions perfectly. Because it traps most of the debris, regular cleaning is recommended, ideally after every few sessions. A clean ash catcher provides the best flavor and performance.

For a quick clean, simply rinse it with hot water. For a deep clean, pour coarse salt (like sea salt or Epsom salt) into the ash catcher, then add 91% or higher isopropyl alcohol. Cover the openings and shake gently for 30-60 seconds. The salt acts as an abrasive to scrub away resin. Finish by rinsing thoroughly with warm water until all alcohol and residue are gone. Let it air dry completely before use.

Regular rinsing and a weekly deep clean with isopropyl alcohol and salt will keep this piece looking and working like new.

• Change the water in the ash catcher daily for the best taste.
• Use isopropyl alcohol and coarse salt for an effective deep clean.
• Shake gently for 30-60 seconds to remove stubborn residue.
• Always rinse thoroughly with warm water after cleaning.

Not sure if the Space Odyssey is the right fit? We have a wide variety of styles, sizes, and percolator types to match any setup and budget. Browse our full collection to find the perfect attachment for your piece.

• Shop All Ash Catchers