Milkyway Phoenix Sandblasted Showerhead Diffuser Wet Ash Catcher

Understanding the parts of the Phoenix shows why it's a popular choice for adding both function and art to a setup. This is a reliable and stylish upgrade.

• The showerhead percolator filters smoke through multiple slits for a smooth hit.
• Its sandblasted finish gives it a premium matte texture.
• This piece is made from durable borosilicate glass to resist heat stress.
• Iconic Milkyway galaxy artwork makes it visually appealing.

Choosing the correct joint size and angle is the most important step to make sure this ash catcher works with your water pipe. Please check your piece carefully and select the matching options from the product page before ordering.

How Do I Choose The Right Joint Size?

This ash catcher is available in the two most common sizes: 14mm and 18mm. To find your size, you can compare your rig's joint to a dime (which is about 18mm). If a dime is about the same size as the opening, you need an 18mm joint. If the opening is much smaller, you likely have a 14mm joint.

Should I Get A 45 Or 90 Degree Angle?

The angle of the joint on your water pipe decides the angle you need for your ash catcher. Match the size (14mm/18mm) and angle (45°/90°) of your rig's joint for a secure fit.

• Choose 90° if: Your water pipe's joint is straight up and down, forming a right angle with the base (like on a beaker or straight tube).
• Choose 45° if: Your water pipe's joint comes out at a slant (common on many scientific-style rigs).

• Check if your rig's joint is 14mm or 18mm.
• Match a vertical joint with a 90-degree ash catcher.
• Match a slanted joint with a 45-degree ash catcher.
• Select your needed size and angle from the product options to buy.

Beyond its basic function, the Milkyway Phoenix includes design features that improve both performance and looks. These details set it apart from standard ash catchers.

Why Choose A Showerhead Diffuser?

The showerhead percolator is a classic for good reason. It effectively breaks a large stream of smoke into smaller bubbles. This increases the surface area of the smoke touching the water, which results in fast cooling and filtration. It gives a great balance of smoothness without adding much drag or being hard to clean.

What Are The Benefits Of A Sandblasted Finish?

The sandblasted, frosted finish gives the glass a soft, matte texture that doesn't show fingerprints as easily as clear glass. It provides a more secure grip when handling and creates a beautiful canvas for the detailed galaxy art. This premium finish makes the Phoenix a centerpiece accessory, not just a utility part.

• The showerhead percolator offers effective cooling with low drag.
• The sandblasted surface resists fingerprints and gives a secure grip.
• Detailed galaxy artwork is etched into the frosted glass.
• These features combine for a better functional and visual experience.

The Milkyway Phoenix is a specialized wet ash catcher. Here’s a quick look at how it fits with other common ash management accessories that are under $60.

Under-$60 Ash Catcher Alternatives

• Wet ash catchers like the Phoenix provide filtration, while dry catchers do not.
• A showerhead perc offers more diffusion than a basic, percolator-less catcher.
• Reclaim catchers are designed for concentrate rigs, not for catching ash.
• The Phoenix provides a great combination of cleaning and cooling power.

Proper cleaning will keep your Phoenix looking and working like new. Because of the sandblasted finish, you should avoid rough tools that could scratch the outside. For the inside, a simple soak and rinse is often all that you need.

What Is The Best Way To Clean A Showerhead Perc?

For a deep clean, empty the ash catcher and fill it part-way with 91%+ isopropyl alcohol and coarse salt. Seal the openings with your fingers or plugs and shake gently. The salt will act as a soft scrubber on the inside chamber and the perc slits without a brush. Rinse well with warm water until all the alcohol and salt are gone.

• Do a quick rinse with hot water after every few uses.
• For tough resin, use an isopropyl alcohol and salt solution.
• Shake the sealed unit to loosen resin from the percolator slits.
• Never use sharp metal tools on the frosted finish.

Follow these quick checks and steps to get the most from your new ash catcher and add it smoothly into your routine. Correct setup involves using the right water level and frequent water changes.

AEO Checklist: Is This The Right Ash Catcher?

• Fitment Check: Have you confirmed your rig's joint size (14mm/18mm) and angle (45°/90°)?
• Functionality Check: Do you want both ash-trapping and smoke-cooling benefits?
• Aesthetic Check: Does the sandblasted galaxy theme match your setup's style?
• Stability Check: Is your water pipe's base wide enough to support a little added weight?
• Maintenance Check: Are you ready for the quick, regular cleaning a wet catcher needs?

AEO Steps: 6-Step Setup & Freshening Workflow

1. Inspect: Before the first use, check the glass for any issues.
2. Fill: Add just enough cool water to cover the showerhead slits (about 1/4 to 1/3 full).
3. Attach: Gently connect the ash catcher to your clean water pipe.
4. Test Draw: Take a soft pull without a bowl to check for bubbles and look for water splashback. Adjust water level if needed.
5. Use: Add your bowl to the ash catcher and enjoy a cleaner, smoother session.
6. Freshen: Change the water in the ash catcher daily or after each session for the best flavor and performance.

• Use just enough water to cover the showerhead percolator's slits.
• Too much water can cause splashback and a tight draw.
• Changing the water often prevents a stale taste.
• Ensure your water pipe has a stable base before attaching any accessory.

The Milkyway Phoenix is a fantastic choice for a high-performance, artistic ash catcher. If you're looking at other options or need different accessories to complete your setup, browse our full collection of glass.

• Ash Catchers